A+ Corporation A+ Corporation



Information Products
PhaseWizard™ software is a powerful tool and the greater the knowledge and skill of the person using it, the greater the benefits that can be realized.  Application Briefs provide a means for an analyzer specialist to improve productivity through self-study on the skillful use of PhaseWizard™ software.  These Application Briefs are specific examples of how to model realistic sample conditions.  Successful self-study of these Application Briefs is potentially the most economical means of acquiring the knowledge necessary to tap into the power that PhaseWizard™ offers to make analyzer personnel more productive.
  1. Hydrocarbon Dew Point Determination - How can Hydrocarbon Dew Point be determined? Complimentary

  2. Validation of Spot Sampling Conditions - How can Spot Sampling conditions be validated?

  3. Quantifying Superheat (desaturation) - How high is the gas temperature above the Hydrocarbon Dew Point temperature?

  4. Pressure Reduction Condensation - Will there be condensation at the regulator?

  5. Dew Point Suppression - How much will the Dew Point be lowered if the pressure is reduced?

  6. Cricondentherm & Cricondenbar - What is the temperature and pressure at the cricondentherm and cricondenbar for a given composition? Complimentary

  7. Maximum Joule-Thomson Cooling - Could Joule-Thomson cooling cause condensation under these conditions?

  8. Insertion Regulator - If the pressure could be reduced without Joule-Thomson cooling, would liquids still condense?

  9. Insertion Regulator Benefit - Is an insertion regulator requireed and will it help?

  10. Penetrating the Phase Envelope - Is the phase envelope penetrated as conditions are changes?

  11. Gas Properties - What are the physical properties of the gas for the given conditions? Complimentary

  12. Insertion Regulator without Membrane - What happens if an insertion regulator without a membrane upstream of the seat is used when liquids are entrained in the gas?

  13. Insertion Regulator with Membrane - What happens if an insertion regulator with a membrane upstream of the seat is used when liquids are entrained in the gas?

  14. Heat Trace Determination - Is heat tracing required for a specific application?

  15. Heat Trace Warning - What will happen if hydrocarbon liquid entered a heat traced zone of the sample system?

  16. Condensation Impact - How much does condensation impact the physical properties and composition of the gas phase?

  17. Warm Gas & Cool Regulator Impact - If there is condensation at the outlet of the regulator, how much will it impact the gas composition and physical properties?

  18. Sample System Design Validation - How can the condition of the sample be determined before and after each component in the sample system?

  19. Excel Phase Diagrams - How can Excel be used to chart phase diagrams from PhaseWizard results?

  20. Constant Liquid Yield Curve - How far below the dew point must the gas temperature be to yield a given amount of liquid?

  21. Water Saturate - What is the maximum amount of water vapor that a specific gas can contain?

  22. Heat Transfer
Application Brief 1,6, & 11 are complimentary in electronic form only.
Contact A+ to order any other.

More about PhaseWizard™ Application Briefs